THX1800 Integrated active 3-way speaker system
THX1800 Integrated active 3-way speaker system technical information
The THX1800 stereo 3-way active speaker system includes all necessary components to convert any passive speaker setup into an active system.
This system's advantage is that it eliminates the need to integrate amplifiers and crossovers within the speaker enclosure. The only required modification is to disconnect the passive crossover and connect the internal speaker inputs to the provided 8-pole SpeakOn connector output.
The system comes with a 7-meter interconnection cable with the following specifications:
-
Tweeter: 1mm²
-
Midrange: 1mm²
-
Woofer: 2mm²
The power handling capabilities are:
-
Woofer: 600W
-
Midrange: 100W
-
Tweeter: 100W
The system utilizes genuine ICEpower 1200AS2 and 200AS2 boards, which come with warranties. Comprehensive operation instructions and system tuning video guides are available on YouTube. Additionally, the system features a 12V trigger for remote operation using modern DACs and streamers with built-in remote services.
By default, the system is supplied with a Behringer CX3400 stereo 3-way active crossover and XLR interconnection cables.
The THX1800 stereo 3-way active speaker system has 2 years of warranties and support available.
The THX1800 stereo 3-way active speaker system does not include a power cord.
Due to the large variations in worldwide mains standards, power cords are not included. Any standard desktop PC-type power cords can be used to connect your system to the mains voltage. The system is compatible with mains voltages ranging from 100V to 240V.
Key specifications
-
1200 W / 4 Ohm per channel ≤ 1 % THD+N, 1 kHz
-
0.003 % THD+N @ 1 kHz, 10 W / 4 Ohm 50 kHz audio bandwidth
-
30 uV A-weighted output noise
-
Minimum load impedance at 2.7 Ohm
-
Maximum output voltage / current 100 Vp / 38 Ap
-
+5 VDC and +/-15 VDC auxiliary supply outputs
-
Universal mains including Power Factor Correction (100 – 240 V, 50 – 60 Hz)
-
TCR1200 amplifier Size (L x W x H): 360 mm x 120 mm x 90 mm,
-
Safety conforms to 60065 & 62368
Amplifier 200AS2 technical information
Key specifications
-
215 W / 4 Ω per channel ≤ 1 % THD+N, 1 kHz
-
2 x 150 W / 4 Ω < 1 % THD+N, 1 kHz
-
0.004 % THD+N @ 1 kHz, 10 W / 4 Ω
-
50 kHz audio bandwidth
-
< 92 uV A-weighted output noise
-
Minimum load impedance at 3.5 Ω
-
Maximum output voltage / current: 42 Vp / 13 Ap
-
Universal mains (100 – 240 V, 50 – 60 Hz)
